Living Room Midpoint Reveal

 

main-image

Finally! I reached a mid-point in the living room remodel. I’ve been dying to post sooner, but living in Portland in the spring does not provide many sunny days. I have been waiting for the right amount of sunlight to take photographs. So as soon as the sun peeked out from behind the gray clouds I scrambled to get everything set up. I totally geeked out over my newest mini that I made this week. As usual I was browsing on Pinterest and came across a really sweet record player that I wanted in real life, so of course the house had to have one to! Here’s the player from ION that I love!

Capture

Here’s my mini version…

20170327_122113

I can’t wait to make tiny vinyl for the player!

This was so much fun to make and by far my favorite mini to date. I took full advantage of a rainy afternoon drafting the design and working out the mechanics of the arm. I mean, what’s a mini record player without a needle that swivels right? Talk about tedious…the needle itself was a challenge. I’m still working out some of the finer details so my OCD can take a rest. I have to figure out how to design the feet on the player and perhaps paint the logo on the front. I decided against the volume control so it wouldn’t interfere with the arm.

20170327_122152

My hubs joking said that I had issues when I pointed out the tiny needle in the arm. It’s all about the details. A mid century console goes hand in hand with a record player like PB and J. As for the console, it got a bit of finishing touches on it as well. The legs were a bit too pointy and I it got washed out against the floor, so I decided to stain every thing except for the doors and legs. I tried coffee first, but it wasn’t quite dark enough so I used a watered down acrylic for the stain and then finished it off with bees wax. I’m really pleased with the result. It goes really well with the couch and wallpaper. Plus it makes the player stand out even more.

20170327_122007

As far as the wall, I had a long narrow mirror that ran the length of it, but it just didn’t feel quite right. I was really proud of it at first because I had salvaged it from an eye shadow compact with a bit of hot water and Goo Off. I tried to pry it off and broke it, so I used the opportunity to try another approach. I’ve seen a lot of circular mirrors lately in other dollhouses like this one from Whimsy Woods Designs that I’ve been admiring.

See this Instagram photo by @whimsy_woods • 368 likes:

I adore this little bathroom!

To make it a bit more dramatic I decided to frame the mirror. My first attempt at framing it was using brass wire that was twisted by hand and then hammered flat, but it wouldn’t adhere to the edge of the mirror without a ton of adhesive being exposed. On such a small scale it just stuck out like a sore thumb. Then I decided to try it with polymer clay. Talk about a DUH moment. So..much…easier. All I had to do was design the frame and then just bake it onto the mirror itself. I carved the surface of the frame to enhance the brass finish which matches the other design elements of the first floor.

20170327_122948

I’ve also been digging the brass plant holders and decorations that I’ve seen around the internet lately so I tried my hand at making one myself. I think it’s super cute next to the little aloe plant that I made from polymer clay. As you can see, there aren’t any base boards yet, but that’s on the list. I also tried to salvage the wallpaper where it ripped from the previous mirror, so I’ll probably end up just going over it again with another sheet. ( So glad I bought 2 just in case. They were on clearance for 19¢ at Michaels!)

The macrame chair got a bit of an upgrade as well. I really liked the green beads that I used but then stumbled upon a pair of wooded ones in a jar. I think those made a big difference. Plus the tassels got a bit of a trim to make it more to scale. Right now it’s suspended from a command hook, but later it will hang from a ceiling beam that I’m installing. They too were stained with a highly pigmented watercolor, but left raw. I know that most Mid Century furniture is rarely left raw or unstained, but this design is a merger of Mid Century modern, Scandinavian and Boho elements, so this representation is peppered through out the room. Hence the Mid Century, natural and raw side table I made.

I also painted the little poster on the wall. The sound of jazz on vinyl is music to my ears. I listen to it every morning during my commute with the family. At first I was going to mount a TV on the wall, but ended up wanting the main room to be where the family interacts with one another without media or computers.  I love technology as much as the next person, but all too often at work I see families all sitting together over a nice meal,…staring at their phones. This image came into play when I designed the main floor with an open floor plan.

20170327_122507

Looking out from the kitchen island.

20170327_12171420170327_121022

 

I hope you enjoyed my mini reveal as much as I did. This is only the mid point, so I still have a lot to make. I’ve been drooling over this Joybird chair even more than the IKEA Poang, so I’ll be working on that design next.

joybird chair

I’ve also got some pottery, books and plants with macrame hangers to create over the next few weeks. ( So much to do, so “little” time).  Please join me again for part two of the living room remodel, I’ll post a few sneak peeks along the way on Instagram and the Facebook Fan Page. Till then, happy miniaturing!

Gorgeous Wood Floors for Dollhouses

floor-photo

Now that the house has been totally demolished it’s time to start on the foundation. I absolutely love wood floors so of course the dollhouse had to have one! Here’s a list of materials that you will need for this project…

  • Craft sticks or Popsicle sticks
  • Safety goggles
  • Dust mask
  • X-Acto knife or garden pruners
  • 60-200 grit sandpaper
  • sanding block
  • Craft glue ( I used Beacon 3 in 1 )
  • wood glue
  • foam board or 1/8″ plywood for the base
  • Minwax wood filler
  • Paper towels
  • pallet knife
  • nail
  • hammer
  • Bees Wax ( I used Three Beautiful Bees Beeswax Polish)

This was probably the most tedious and time consuming part of the project, but I embraced the details! If you are trying to go for a more realistic effect, then don’t skip out on this part. When selecting each “plank” make sure that they are level and flat. I found out the hard way when I glued a few down and then had to spend an eternity sanding them down. Ugh!

Measure out the space of your room and cut your foam board or plywood to fit.20170111_21485320170111_223225

Inlay your base and then the real fun begins. Cut the rounded edges of each stick using your blade or pruners and lay them out. (Be sure to wear your safety goggles. The last thing you want is a piece of wood flung in your eye)! Since each “plank” is different, I used a number/letter system on each row just in case one of my kiddos, hubby or I (most likely the latter) should bump into it.

20170112_003014

Many, many hours (and a few glasses of wine) later.

The small pieces on the end were the tips that I cut off each stick. I like to use every piece available. Once you have your floor in place the way you want, it’s time to glue. This is where the labeling system came in handy. I lifted one row and accidentally bumped the rows above and was able to put them back without the headache of wondering where each one went. I used Beacon 3 in 1 craft glue. It has a quick grip which was great because I didn’t have to use a weight to clamp them down to the foam board. I did experience a slight warp in the board from the moisture. I got some advice from an awesome miniature group on Facebook, which was to spray a light coat of sealant on both sides prior to gluing to prevent the warp. I let the floor set overnight before filling in the cracks.

20170112_232836

Using the pallet knife, spread the wood filler over the surface and let set for the recommended amount of time. Using the roughest grit sandpaper (60)  wrap it around the sanding block and sand the floor in the direction of the grain. Work your way up to the smoothest grit (200). After sanding you are now ready to add the nail head details. Using the small nail, gently hammer two small indents on each end of every board. ( This was the fun part for me, because it meant that I was almost finished)! Once you are satisfied with the smoothness of your floor remove any debris and prep for waxing. Using your fingers, smooth on small amounts of wax section by section and let set overnight. Buff using a circular motion and a soft cloth. Repeat the waxing process, then sit back and enjoy all of your hard work!

20170117_152015

A close up of the nail head detail. I love how the wax brought out the natural character in the wood.

dscn4506

Now that the floor is finished, the first wall has been put up. I’m ready to make some furniture. 

I’m super excited about the next phase of the ground floor. I’m building my dream kitchen all by hand. I guess I watched too many episodes of Fixer Upper on Netflix because somehow a farmhouse sink ended up in my kitchen island, and I’m even not super crazy about country decor. This will be a mid century/ bohemian/ Scandinavian design.  That’s a mouthful I know, but I think that each element will compliment each other nicely.  Here’s a sneak peek of what’s to come. Hope you enjoyed this tutorial. Please feel free to leave a comment or add pictures of your own project. Cheers!

20170302_123504

How to make this kitchen island up next!

A Fresh New Look for an Abandoned Dollhouse

20170111_192609

I rediscovered my love of dollhouses when my husband brought home a beautiful find off Craigslist. The furniture and house were in great shape, but I had visions of a more modern design. My daughter loved it and I was excited to make her a dollhouse of her dreams. (okay, my dreams). It began with a miniature of an IKEA couch and Billy Bookcase, because everything starts there, right?

We found the perfect little family to live in the house. She really loved to play with them and it was fun watching her little family come to life through her imagination. Then the dinosaur phase kicked in. The sweet little family was kicked out and forced to live in the toy box. Now the toy dinosaurs ruled the roost. Thus began the end of her love affair with her dollhouse as dinosaurs and Lego took over. I too put it aside but longed for her to play with it so I could as well. Eventually she outgrew the dollhouse all together and the decision came to sell it.

I came across the furniture that I had made while cleaning up the house. Something had been sparked. I had a dollhouse when I was a little girl given to me by my mother’s friend for my birthday. It was supposed to be a project that we did together. I was so excited that I couldn’t wait and it was fully assembled by the time he came by to visit. I had even made little curtains and bedding. I didn’t even have any dolls to live in the house, but it was the decorating and construction that I loved the most.

I’ve always been crafting of some sort. Either sewing, crochet, painting, sculpting, building or anything else that inspires me. So far this has been a great outlet for all my crafts and keeps me busy.  Here’s a look at the house before I dismantled it.

Dollhouse-blog-photos.gif

Here’s the house before demo day. It’s very similar to the Plan Toys Terrace dollhouse. The window and door panels can be removed and rearranged for open play.

20170111_194130.gif

Down to the bones.

Demo day was a bit of a challenge. The dowels were glued in place as well as screwed so I had to drill out some parts. The house had suffered some minor damage over the years so I was happy with my decision to completely remodel the house. After much searching on the internet I finally found the manufacturer of the dollhouse. It’s a Cheerwing Happy Family house. I thought for years that it was a version of the Plan Toys Terrace dollhouse. I found that the biggest problem with the house was that it was really deep. My daughter had to really stick her arm in to play. I took this into consideration when designing the new layout.

Starting from scratch posed many possibilities and challenges. The best way to tackle such a task was to use Sketch Up. It’s an awesome program and very easy to use.  I was able to draw a side by side, before and after illustration. I guess I’d describe myself as somewhat of an OCD (all of my friends know this part to be so true) creative type. I like to plan everything out and then let the more imaginative side take over from there. What I found was a happy medium between what I had envisioned and what was functional in reality.

After the house was completely taken apart, it was time for clean up. There was a lot of glue and a few scratchs and dents that needed to be sanded down.

 

Now onto the next step which is the flooring. It was a no-brainer  when it came to the flooring, all hard wood floors! The best way to make a hardwood floor was to use Popsicle sticks. I’ll be sharing with you how I was able to create beautiful flooring in my next post.  Thank you so much for visiting. I hope that you were able to find some inspiration of your own. Are you working on your own remodel? I’d love for you to share your work! I look forward to you comments and feedback. Cheers!